As far as cars in French films go, there’s the bizarre (the flying Citroen DS19 from “Fantomas”), the pointedly comic (anything appearing in Jacques Tati’s “Trafic”), and the absurd (the transparent Cadillac and the backwards Peugeots and Renaults of “Mood Indigo”). But there’s none more iconic than the battered green 1967 Ford Mustang from Jean-Paul Belmondo’s 1983 action flick “Le Marginal” that danced and slid and bashed fenders through the streets of Paris and which will head to auction next month.

If the Mustang in “Le Marginal” comes off as reminiscent of the Highland Green 1968 Ford Mustang GT that Steve McQueen drove in “Bullitt,” that’s no coincidence. McQueen had died just three years prior, so Belmondo and director Jacques Deray wanted to pay tribute to the late actor with the chase scene they had planned for their crime thriller “Le Marginal.” Though far from a shot-for-shot remake of the earlier movie’s chase scene, the Remy Julienne-coordinated chase—complete with stunt driving by Belmondo—still featured a number of similarities from the pair of baddies in the other car to the brutal end that they meet. The other car’s even a Mopar, albeit a circa-1977 Plymouth Volare four-door sedan rather than a Dodge Charger.

And of course, a tribute wouldn’t be complete without the Mustang. Artcurial calls it a 1966, but according to the car’s VIN (7T01A120268), it’s a 1967 model year car that came out of the Metuchen, New Jersey, assembly plant. Apparently sold new in France, the Dark Moss Green car was first registered for the road there in December 1966. Five years later, Parisian Jean-Michel Brault bought it, registered it with the license number 9 TL 75, then sometime afterward commissioned Michel Mokrycki, a French V-8 specialist perhaps best known for preparing a Rolls-Royce for the 1981 Paris-Dakar, to rebuild the Mustang’s A-code four-barrel 289 with some measure more than its stock 225 horsepower.

At some point either during Brault’s ownership of the Mustang or when Julienne began preparations for filming, the Mustang underwent numerous modifications. Barrel flares covered wider wheels and tires, massive foglamps filled the grille, a pair of quarter-panel scoops were reversed and fitted to the fenders, all chrome was painted over, and a piece of clear plexiglass was cut into the roof (the latter reportedly to help shed light on Belmondo while he was at the wheel of the Mustang). The Mustang also underwent a severe debadging, with even the fuel filler removed from the tailpanel so as not to show the galloping horse emblem. It even appears to have yellow headlamps.

Car Chase Collection : Le Marginal

youtu.be

The movie, described as a typical Belmondo vehicle, nevertheless did well at the box office, and whether it was the star’s McQueen-like intensity, the fact that he did his own stunts, or the Mustang itself, the chase became just as legendary among French film aficionados and gearheads as the “Bullitt” chase did here in the States. As Artcurial’s Matthieu Lamoure wrote, “Le Marginal” is no cinematic masterpiece, but the Mustang and the car chase forever influenced him. The Mustang is “a part of our collective memory, our cultural heritage,” as the Artcurial description noted.

Julienne had Jo Cote—an occasional stunt driver and Julienne’s mechanic—prepare two nearly identical Mustangs for the film. One, reportedly fitted with a 400hp engine, was slated for the grisly end to the car chase and was subsequently destroyed, but the hero car—still wearing the same registration number from Brault’s ownership—survived filming and afterward was parked on Cote’s property. As with the Bullitt Mustang, the Le Marginal Mustang’s whereabouts were unknown for many years while it sat in Cote’s possession. According to Artcurial, Cote had committed the Mustang to a scrapyard when a Mustang enthusiast recovered it, then sold it to a Belmondo fan who recognized it as the “Le Marginal” Mustang.

That Belmondo fan then set about restoring the Mustang to its film appearance, and though it wears different wheels and tires and smaller foglamps, it still has the same low, wide-tired no-nonsense street brawler appearance as when it appeared in the film.

The “Le Marginal” Mustang will cross the block as part of Artcurial’s Retromobile sale with a pre-auction estimate that ranges from €200,000 to €400,000 (about $215,000 to $430,000). The Bullitt Mustang, by way of comparison, sold for $3.74 million, including buyer’s fees, when it went up for auction in January 2020. Artcurial’s Retromobile sale will take place February 3 and 4 in Paris. For more information, visit artcurial.com.

Date: July 1976

Location: Rome, Italy

Source: Leonard J. Currie, via Virginia Tech University Libraries / JStor

What do you see here?

Photo by Leonard J. Currie

Photo by Leonard J. Currie

Rory Carroll is Head of Marketing and Communications for RM Sotheby’s, so he knows a thing or two about automobiles. He’s also an automotive masochist, as he owns, races, and is in the process of rebuilding a Lada Signet, a little Russian box car that looks just like a classic Fiat 124 sedan. More importantly, is that he gets to rub elbows with some of the most iconic and highly valued automobiles in existence, which, let’s face it, is pretty damn cool.

On this episode of the Hemmings Hot Rod BBQ podcast, Rory sits down with us and talks about the auction trends in 2022 verses what we think may happen in 2023, as well as which collector vehicles are beginning to come into their own in the auction world.

Listen here:

Nothing says “performance vehicle” quite like a red disc brake caliper peeking through the spokes of an alloy wheel. But what was once the realm of exotics and track-day cars, is now a little slice of go-fast heaven you can have for your own, no matter what kind of car you drive. As long as it’s running disc brakes that you can see behind its wheels, of course.

The POR-15 Brake Caliper Painting Kit was designed to do two things: protect your calipers from the elements and make you look like you drive a high-performance car every day. Based on the Rust Preventive system POR-15 is known for, the final paint is available in five colors and the kit comes with everything you need to single-handedly turn your daily-driver from zero to hero.

More than just a layer of shiny paint behind your wheels, the Brake Caliper Painting kit gives you a solid base of protection under that new color. After all, your brake calipers are located in one of the most punishing environments your car can serve up: a constant cycle of heating and cooling, road dirt and debris, varying degrees of moisture and the accumulating dust from brake pads that are constantly wearing away. So, when you can protect that hardware from all that punishment and make them look good at the same time, that’s a win all the way around.

The kit comes complete with:

1. Cleaner/Degreaser: a good paint job starts with a clean surface and the POR-15 Cleaner/Degreaser is formulated to remove oils, dirt, greases and other contaminants, ensuring a great foundation for the paint.
2. Metal Prep: this stuff prepares the surface of your caliper for the best adhesion and consistent coverage of the patented Rust Preventive.
3. Rust Preventive: what POR-15 is best known for, the Rust Preventive is not only designed to cover and seal the porous surfaces of your brake calipers, but add a layer of protection from the elements and sets up your final coats of paint for a long life.
4. Caliper Paint: here’s where the magic happens! Choose your favorite color, as long as it’s black, red, yellow, grey or blue and become a driveway hero with this self-leveling paint that not only looks great, but is tough as nails.

Along with gloves, applicators and detailed instructions, the POR-15 Brake Caliper Painting kit is the easiest way to spruce-up the look of your daily-driver with a complete solution. Find more here and you’re five easy steps away from a new look for ride!

Date: April 1985

Location: Las Vegas, Nevada

Source: Bob Paluzzi, via UNLV Digital Collections

What do you see here?

Ken Block raced in just about every championship-level rally racing series there is, including WRC, but the majority of his rally racing career took place on U.S. soil, either in the Rally America series or in the American Rally Association National Rally Championship series. His—and the rest of the Hoonigan team’s—efforts in the latter in 2022 served as the basis for the hour-long documentary “Go Fast Risk Every Thang” that Block and Hoonigan released just a few weeks before his death earlier this week at age 55. While it’s not difficult to get a sense of Block’s personality from the literal days’ worth of video footage of him online—including the Gymkhana series of videos—the documentary follows him and the team through the entire ARA season and all of the adversity they faced as they tried to secure the championship in an entirely new and unproven car while meeting all the various other media and race commitments throughout the year.

GO FAST RISK EVERY THANG: The Wild Story of Ken Block’s ’22 Rally Racing Title Chase

www.youtube.com

1. What exactly makes Hot Wheels a mainstay on shelves across America? NPR recently examined the enduring popularity of the toy brand and how it’s managed to keep inflation from ratcheting the price of the cars.

Hot Wheels are a retail oddity. They remain one of the most affordable toys in the country at a time when inflation is chipping away at savings accounts and compounding credit card debt for many Americans, experts like James Zahn told NPR. “It is exceptionally rare to find a toy that maintains its price for a few years, let alone more than five decades,” Zahn says. “Hot Wheels are an anomaly in that the continued sales volume and razor-sharp production pipeline manage to keep costs just low enough to maintain that sweet $1 price point.”

2. Mark Axen recently forwarded History.com’s summation of the 1936-1937 GM sit-down strike, one of the most important events in auto labor history.

The strikes had lasted for 44 days, left 136,000 GM workers idle and caused 280,000 cars to go unbuilt. Though much of the public was against sit-down strikes and considered labor unionists to be dangerous rabble-rousers, GM’s public image had suffered, too. And labor would never be the same. Union membership ballooned from 3.4 million workers in 1930 to 10 million in 1942, and the majority of the automobile industry swiftly unionized, gaining benefits and pay they never would have obtained without organizing. “They were the most important strikes in American history,” Lichtenstein says. For decades, he says, industrial unionism reigned supreme, leading to a higher standard of living for working Americans.

Stellantis media photo

3. Boardroom intrigue typically amounts to inside baseball, but as Bill McGuire of Mac’s Motor City Garage tells the story of the 1960 Chrysler scandal, the ramifications played out in the cars the company built and the scandal itself nearly led to the company’s demise.

On April 28, 1960, Lester L. “Tex” Colbert stepped down as president of the Chrysler Corporation to take the honored position of chairman of the board. His 10-year run as president had apparently been a successful one. Accomplishments under his leadership included the development of three advanced hemi V-8 engine families for Chrysler, Desoto, and Dodge, the Torqueflite transmission, the launch of the compact Valiant, and the transition to Unibody construction. For his successor as president, Colbert hand-picked his longtime lieutenant, friend, and Bloomfield Hills neighbor, William C. Newberg. And then barely days later, hell broke loose.

One influential Chrysler board member, Pittsburgh coal magnate George H. Love, was curious enough about the continuing accusations to press for an independent audit of the company. The audit, conducted by Touche, Ross & Co., almost immediately uncovered an alarming conflict of interest: Newberg and his wife owned a 50 percent interest in two Chrysler parts suppliers, Press Products, Inc. and the Bonan Company. Suddenly the high parts costs and poor quality had a plausible explanation. On June 30, Newberg was forced to resign after just 64 days as president. As part of his separation agreement, Newberg agreed to repay $455,000 in profits he received from his outside companies for their contract work with Chrysler.

While the executive offices were erupting in chaos, engineering, production, and sales were wracked with turmoil as well. It was Newberg who reportedly made the abrupt decision in mid-1960 that the 1962 Plymouth and Dodge had to be radically downsized, and the engineering and styling staffs struggled to meet the sudddenly tight deadlines.

The proposed full-sized Dodge and Plymouth designs for ’62 were hastily shrunk down to fit on a stretched Valiant platform, and no one was happy with the result. In a now-famous phrase, Chrysler design vice-president Virgil Exner called the awkwardly styled cars “plucked chickens.” As one story goes, Newberg made the downsizing decision after mishearing some party gossip about Chevrolet’s plans for the 1962 Chevy II, which he took to mean the carmaker’s full-sized line.

4. Over the holidays, Kustomrama shared a thorough deep-dive into the canted-quad headlamps styling trend that spans the feature’s production-car origins as well as its spread among customizers across the country in the late Fifties and early Sixties.

Glenn Goode’s Big People – The Documentary

www.youtube.com

5. Finally, a recently released documentary on Glenn Goode tells the story of the man largely acknowledged to have saved the muffler men and other massive fiberglass roadside advertising statues from obscurity. (via)

There are storage solutions and then there are garages. And when it comes to the great American garage, nothing makes it a bucket list garage-mahal quite like a collection of classic cars and all the toolboxes, parts, engine stands and workbenches surrounding it.

To take that idea a step further, the ultimate home shop is one purpose-built for the job of housing and protecting all that iron. And a pole building, designed for and by classic car collectors, is not only a great idea, but one that will make owning, wrenching and enjoying these cars that much easier.

Here at Wick Buildings, we’ve got the collector in mind when we design our post-frame structures. We know that a new shop isn’t just a practical decision, but it’s also an emotionally-driven one: you choose the type of building based on needs, but also on how you want to best protect and enjoy your investments. And it’s with that in mind, that we build features you need with the experience and support you want into every one of our pole building shops.

Proper ventilation for classic cars

One of the most important features of a new pole building is one that isn’t instantly noticed when choosing a style and size: proper ventilation. Proper air ventilation is the best solution to control condensation. Keeping that moisture off your tools, undercarriage and parts will keep potential rust from forming. Any internal combustion engine-powered vehicle will emit airborne toxins, but vintage automobiles, motorcycles, boats, snowmobiles, farm equipment and the like are in a class of their own. The architects and engineers at Wick understand this issue and have designed features into every structure to make sure that it’s addressed when you’re in – and out – of your new shop:

1. Vented ridges: everyone learns in grade school that heat rises, but Wick buildings use that natural phenomenon to direct stale air to the roof of the structure and allow it to escape through a protected vent in its peak.

2. Vented eaves: a vented ridge design feature is only as effective as the fresh air that can replace the stale air it’s so good at removing from the building. Our vented eaves allow fresh air to flow into the pole building as the other half of the total air circulation process. These vents are protected from the elements, while being effective in keeping your classics cushioned in fresh air.

3. Vented building features: as an optional design feature, we’ve designed a vented cupola that can be incorporated into the roof your building – they look great and function just as well. The gables of your building can also be vented on both ends, which create more natural ventilation.

4. Powered ventilation options: natural, passive ventilation designed into the building is always a good idea, but you might need more. In that case, a few options are available:

– Attic fans or ventilators. Mounted either in a gable wall with opening and closing shutters or under a covered vent in the roof, they can move a lot of air and can be triggered by temperature or humidity levels.

– Power vented cupolas. These electric fans mount in the cupola and can also be triggered by temperature or humidity levels.

– Exhaust fans. Similar to the common bathroom fan, these can be used to remove moisture, vapor, or odors from interior spaces or rooms under the attic. Use the appropriate filtering system for the type of exhaust you are removing.

– Air exchangers. This option is commonly used in residential and commercial environments when you are exchanging interior air that is heated or cooled.

Fresh air enters through the vented eaves. Warm and humid air exits through the vented ridge.

For more information on the ventilation features Wick Buildings has designed:
https://www.wickbuildings.com/blog/pole-barn-ventilation-essentials/

Storing your collector cars

Choosing the right type of pole building to house all your collector car dreams is one thing, but maintaining those vehicles so they don’t turn into nightmares goes hand-in-hand with that choice. And making sure your treasures enjoy the proper atmosphere will go far in making sure you do, as well.

1. Proper heating: if you live in a region that sees all the seasons, make sure your new building can properly heat itself in colder months. After all, moisture is your enemy and the properly oscillating air – at the right year-round temperature – is key to keeping your cars warm and dry.

2. The man cave: if you’ve got a collection of cars, chances are that you’d like to spend some time around them, especially when you’re not under them. A few couches, a bar, a TV or even a kitchen of some scale might be an essential element of your dream garage: make sure you design these elements into your new pole building with the climate control ideas in mind to keep you as comfortable as your cars are.

3. The plastic sheet: hot tip: park your car(s) over a plastic sheet to keep any moisture coming up through the floor during temperature fluctuation from affecting its undercarriage.

4. Drainage: speaking of moisture, make sure the floors in your new pole building have proper drainage features. Nothing worse than puddles of water or fluids that can’t escape the interior of your building quickly and efficiently.

5. Keep it lubed: the worst thing for a classic is not driving it. Remember, these cars were meant to do one thing very, very well: move. While you’re not driving it, keep its moving parts properly lubricated, greased and maintained. And while we’re talking about storage, disconnect the battery (better yet, remove it) when it’s parked for extended periods of time.

For more tips on storing your collector cars:
https://www.wickbuildings.com/blog/store-classic-car/

Contact us!

When it’s time to start making your dreams a reality, take the first step and contact us: not only do we love hearing about your passions, we love building the ultimate garage-mahal to house them!