Skip to main content

Category Added in a WPeMatico Campaign

Today’s find brings us back to the days of big hair, roadies and rock and roll, but with a bit of modern flair. This dual axle custom van has been displayed at the Museum of Automotive Icons, Inc. for the last four years, but it’s time for it to hit the road, so the museum can make room for new additions.

“This custom-built 1980 Dodge B-series van is the epitome of artistic flair,” the curator of the Museum of Automotive Icons, Inc. states. “It’s airbrushed medieval-fantasy-themed exterior sets it apart from others, and the interior is just as outrageous with a full-length bar, numerous insulated ice bins, richly textured bench seats that line the entire driver’s side and rear of the van, dual flatscreen TVs, dual air conditioning units, and LED and fiber optic lighting. Its massive sound system rounds out the multimedia functions, making this Dodge the ultimate party machine.”

The majestic mural set above sparkling chrome side pipes is what custom van dreams are made of. Fully armored knights, horses, castles, wizards, and mysterious orbs surrounded by billowing fiery clouds create a powerful fantasy land that is a beacon for attention. The overall condition of the paint is reported to be in excellent condition, with some minor scratches and paint chips on the lower rocker areas.

According to the listing, the odometer shows just 3,262 miles. It has only been driven 15 miles since in the museum’s possession. The 360-ci V-8 appears to be the original engine, though that has not been confirmed. Minor modifications include an aluminum intake manifold, headers, and, of course, those sweet side-pipes. The seller states that the van runs, drives and shifts smoothly through all the gears as it should, as shown in the below video.


1980 Dodge Custom Van

youtu.be

The luxurious, party-ready interior is fully functional, including color changing fiber-optic lights, working sunroof and power windows, dual flat screen TVs, dual air conditioning units, and massive sound system. The full-length bar holds insulated ice bins to keep the party going.

Who will be the next to own this club VIP room on wheels? Click this link for more details and photos.

1980 Dodge D-Series custom van

1980 Dodge D-Series custom van

1980 Dodge D-Series custom van

1980 Dodge D-Series custom van

1980 Dodge D-Series custom van

1980 Dodge D-Series custom van

1980 Dodge D-Series custom van

1980 Dodge D-Series custom van

1980 Dodge D-Series custom van

1980 Dodge D-Series custom van

1980 Dodge D-Series custom van

1980 Dodge D-Series custom van

1980 Dodge D-Series custom van

Sick Week 2023 is in motion! We’re sure you can agree that winter has a shelf life. We look forward to it when we settle around the table for the turkey dinner. We revel in it as we open presents and as we ring in the new year, but by early February, the majority of us are sick of it and are more than ready for warmer temperatures and outdoor activities. For 350 racers, the remedy includes packing up the race car or truck and heading south to Orlando, Florida to join Tom Bailey’s drag-and-drive romp through Florida and Georgia. The program hasn’t changed since Sick Week was created, and it isn’t too far removed from Hot Rod Magazine’s Drag Week, a competition that Bailey has won five times.

Sick Week 2023 Day 1

Sick Week brings 350 race cars down south for a drag-and-drive that only a Hot Rod Drag Week veteran could put together. With five tracks to hit between the states of Florida and Georgia, there’s plenty of racing action to keep everyone entertained.Cole Reynolds

With racers having spent Sunday testing and tuning and finalizing their plans to tackle the week, it was time to get straight to the business at hand Monday morning. Many heavy hitters were ready to take their swipe at the tree. Alex Taylor and her 1955 Chevrolet were right at the front of the line first thing. As the day moved along, many names familiar to these events would roll through. Eric Yost, who hasn’t raced at an event since 2017, got right back into the groove with his 1968 Chevrolet Camaro, knocking out a 7.408-second run at 182.39 MPH. Bryant Goldstone made his triumphant return to the scene with his twin-turbocharged Unlimited Iron-class 1973 AMC Javelin, laying out a stout 6.741-second lap at 211.33 MPH, not bad for a car that was last seen parked on its roof after a big crash at US 131 Motorsports Park during Hot Rod Magazine’s Drag Week 2021.

Sick Week 2023 Day 1

The spread of cars that are taking on Sick Week is impressive. Everything from a mid-1960s Suburban that’s running 26-second laps to numerous competitors in the six-second range, you’ll find it cruising along!Cole Reynolds

But for every good lap, there’s a bit of bad. Dave Schroeder of the Schroeder-Ens racing partnership was on a tear in their Unlimited-class 2019 Chevrolet Corvette when the car got loose, turned right and took aim at the right sidewall near the 1,000-foot mark in the middle of a mid-six second pass. After bouncing off the wall at over 200 MPH, the C7 started rolling and smacked the left side before coming to rest on the wheels. Schroeder walked away unhurt. They may have had the worst luck of day one, but there were others in the pits thrashing away, fixing broken parts and making sure that they could make the drive that includes stops at the Big Toho Marina at Lake Tohopekaliga and Woody’s River Roo before the drivers make their way to either their hotel or to Bradenton Motorsports Park for the night.

Sick Week 2023 Day 1

Even on the first day, carnage could easily be found in the pits. Here, Jeremie Ziegler and company are performing surgery on his 1989 Ford Festiva in the hopes of continuing on to Bradenton.Cole Reynolds

Day One Leaders:

  • Unlimited: Tom Bailey, 1969 Chevrolet Camaro, 6.249@188.91
  • Unlimited Iron: Bryant Goldstone, 1973 AMC Javelin, 6.741@211.33
  • Modified: Brett LaSala, 2012 Ford Mustang, 6.524@212.26
  • Pro Street: Clark Rosenstengel, 2010 Chevrolet Camaro, 7.128@206.20
  • Super Street: Eric Yost, 1968 Chevrolet Camaro, 7.408@182.38
  • Stick Shift: Richard Guido, 1965 Pontiac GTO, 8.919@154.86
  • Naturally Aspirated: James “Doc” McEntire, 1968 Chevrolet Camaro, 7.850@143.38
  • Rowdy Radials (1/8th Mile): Jordan Tuck, 1993 Ford Mustang, 4.685@162.55
  • Sick Week Freaks: Tony Niemczyk, 1995 Mitsubishi Eclipse, 8.799@154.63
  • Hot Rods vs. Beetles: Larry West, 1941 Willys, 9.934@135.47
  • Street Race 275: William Lujan, 1990 Ford Mustang, 8.506@161.71
  • Sick Street Race: Aaron Shaffer, 1998 Chevrolet Camaro SS, 8.516@163.61
  • Pro DYO: Nick Wiegand, 1976 Pontiac Trans Am, 8.610@158.99
  • DYO: Rajveer Ahuja, 1967 Oldsmobile 442, 10.124@132.40
  • Challenge: Robert Sharp, 2019 Dodge Charger, 10.630@131.64

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week Day One Photo Gallery

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Sick Week 2023 Day 1: Orlando Speed World

Aerial combat advanced at an astonishing rate during World War I, and though it seems unimaginable today, there were no American-designed aircraft deemed suitable for battle in the skies over Europe. There was a U.S.-designed engine in the fight, however: the Liberty V-12, or L-12.

The L-12 engine was America’s greatest technological contribution to the aerial war effort. Its initial assignment was powering the “Liberty Plane”—a version of the British-designed De Havilland/Airco DH-4 bomber produced in the U.S. by Dayton-Wright in Ohio, Fisher Body Corporation in Michigan, and Standard Aircraft in New Jersey. In addition to powering the DH-4 and a variety of other airplanes, over its long service life the L-12 powered tanks, high-speed watercraft, and land-speed racers.

Color closeup image of an L-12 engine in a De Havilland DH-4 airplane.

An L-12 at home in the front of De Havilland DH-4 at the National Air and Space Museum. The engine weighed about 844 pounds and produced approximately 400 hp at a maximum rpm of about 1,800.Photo provided by The Smithsonian

The L-12 came about because Packard’s head of engineering, Jesse G. Vincent, recognized the need for a standardized line of aircraft engines that could be mass produced during wartime. The government assigned Vincent to the task of creating this engine and teamed him up with Elbert J. Hall of the Hall-Scott Motor Company. The two met in Washington, D.C., on May 29, 1917 and, with the help of volunteer draftsmen, created detailed drawings and a full report by May 31. This original design was a V-8, but in their report Vincent and Hall outlined how the engine could be configured as a 4-, 6-, 8- or 12-cylinder.

By July 3, a V-8 prototype assembled by Packard was running, and a V-12 soon followed. Due to its superior horsepower potential, the 1,650-cu.in. V-12 was given the nod for mass production.

Color closeup of an L-12 engine at the Glenn H. Curtiss Museum.

On this L-12 on display at the Glenn H. Curtiss Museum, the spark plugs have been removed (note the hole on top of the right cylinder) and the plug wires cut. Note the copper tubing that carries oil up the cylinders to lubricate the cam and valvetrain.Photo by Mike McNessor

Not only did the Liberty engine mark a great achievement for American aviation, it was responsible for creating a landmark car company: Lincoln. Henry Leland, who founded Cadillac, and his son Wilfred started Lincoln with a $10 million government contract awarded to build Liberty engines. The Lelands left Cadillac to form Lincoln because General Motors President William C. “Billy” Durant was a pacifist and initially rejected the government’s call for GM to build L-12s. (Liberty engines were later manufactured by GM.) Production numbers seem to vary for output before and after the war but, in total, Ford, Lincoln, Packard, Marmon, and Buick produced 20,748 L-12 engines.

The L-12 was a liquid-cooled, single-overhead-camshaft, V-12 rated to make 400-plus horsepower. The deep box-section crankcase was two-piece—upper and lower—and cast out of aluminum. The cases were joined together by bolts around the perimeter as well as by bolts on each side of the main bearings. The cylinders were individual with welded-on cooling jackets and they extended down into the crankcase for increased rigidity. The stroke was 7 inches while the bore was 5 inches, and aluminum pistons on floating pins helped pump up 5.4:1 compression. The cylinders breathed through 2.5-inch valves (one intake, one exhaust) with exposed rockers and valve springs, while carburetion was handled by a pair of Zenith model US52s.

Color closeup of a Liberty 12 Firing order tag on the L-12 engine at the Glenn H. Curtiss Museum.

An I.D. tag shows the L-12’s firing order and reveals that this example at the Glenn H. Curtiss Museum was built by Lincoln on September 25, 1918.Photo by Mike McNessor

The Liberty is a fascinating engine built with many advanced features. A full report about the L-12 presented in 1919 to the Society of Automotive Engineers by Jesse G. Vincent is available as a free download at jstor.org.

Illustration showing the intricacies of a Liberty 12 engine.

The order came down in the fall of 1970: No more aero cars in NASCAR for the 1971 season. Ford and Mopar had taken the cars to speeds and the sport to a level that Bill France hadn’t anticipated or wanted, so he limited all “special” cars to a maximum engine size of 305 cubic inches. Aero development programs for 1971 stopped. Factory support withered. Engineers were assigned elsewhere. While nothing initially came of those development programs, 30 years later a trio of wing car enthusiasts built a series of cars imagining what they would have looked like, some of which will head to auction this May.

The germ of the one-of-none 1971 wing cars that Massachusetts residents Gary and Pam Beineke and Mike Goyette built in the early 2000s came from a handful of photos that Goyette discovered of wind tunnel tests for aerodynamic modifications for the 1971 Dodge and Plymouth B-bodies. Described as the G series following the 1969 E series and 1970 F series, the aerodynamic modifications were tested on 3/8-scale models in the Wichita State University wind tunnel over three months. According to an interview Chrysler aerodynamicist Gary Romberg gave to Steve Magnante at Hot Rod magazine in 2005, the purpose of the tests was mainly to try out “various nose cones, wings, fairings, rooflines, and windshield configurations.” Among those configurations were a bi-level wing and even a tri-level wing.

While the tests were cut short by France’s decree, Romberg and his team were still able to deliver a 406-page report in October 1970 outlining their findings. “Though they look sleeker, the fact is the ’71 cars were not as good,” Romberg told Magnante. “They were wider and presented a greater cross-sectional area that was an immediate disadvantage.” According to Steve Lehto’s book, “Dodge Daytona and Plymouth Superbird,” even with the aerodynamic modifications, the 1971 cars would have run at least 2 MPH slower than their predecessors.

Romberg also confirmed that no full-size 1971 cars were built with any of the aerodynamic modifications that his team tested in the wind tunnels. Regardless, Goyette and the Beinekes – 1971 B-body enthusiasts who already had a 1971 Dodge Charger awaiting restoration – decided to see what such a creature would look like.

1971 Dodge Daytona

1971 Dodge Daytona

1971 Dodge Daytona

1971 Dodge Daytona

1971 Dodge Daytona

1971 Dodge Daytona

1971 Dodge Daytona

1971 Dodge Daytona

1971 Dodge Daytona

1971 Dodge Daytona

The Charger, a rusty junkyard refugee originally equipped with a 383 and four-speed, benefited from an NOS pair of quarter panels, new doors, fenders, and rocker panels, Ramcharger forced-air hood, and the roof skin and mechanisms from a sunroof car. To the car, Goyette added a scratchbuilt steel bi-level wing like the one seen in the wind tunnel test photos, equipped with a latch for tilting the lower wing out of the way so the trunk lid can fully open and the appropriate strut braces. For the nosecone, Beineke and Goyette took a fiberglass reproduction of a 1969 Charger Daytona’s nose, cut it up into four pieces to fit it to the 1971 Charger’s fenders and hood, widened it by an inch and a half, then took a mold off the modified nosecone to produce a one-piece fiberglass nosecone that they then mounted to the car using 1969 Daytona retractable headlamp buckets adapted to the 1971 Charger’s electric headlamp door actuators.

While the rest of the car was built to look like one would expect a loaded, Hemi-powered, manual transmission 1971 Charger Daytona to appear, it’s largely a facade. The Hemi, for instance, is a 472-cu.in. crate engine with forged innards and an aluminum intake manifold that Goyette fabricated to mount three two-barrel Holley carburetors, creating a never-was Hemi Six-Pack. It has a five-speed manual transmission with Pistol Grip shifter instead of the expected four-speed, a Dana 60 rear axle with 4.10 gears, and 11-inch discs front and rear.

1971 Plymouth Superbee

1971 Plymouth Superbee

1971 Plymouth Superbee

1971 Plymouth Superbee

1971 Plymouth Superbee

1971 Plymouth Superbee

1971 Plymouth Superbee

Naturally, the Beinekes and Goyette followed the 1971 Daytona build with a 1971 Superbird though, just as the 1969 Charger Daytona’s aero parts differed significantly from the 1970 Plymouth Superbird’s, the team took different approaches for the front and rear aerodynamic modifications for their one-of-none builds. Rather than adapt E- or F-series aero parts for the nosecone, they built the unit for the 1971 Superbird from scratch to replicate the one seen in the wind tunnel testing photos, starting with a wireframe built from thin-steel tubing, over which they applied a fiberglass skin and into which they inserted headlamp mechanisms from a Pontiac Fiero. The single-plane rear wing might have the same angle of a 1970 Superbird’s, but Goyette still had to fabricate it entirely out of steel to match the complex contours of the Plymouth’s upper quarter panels. As with the 1971 Daytona, the 1971 Superbird received a 472-cu.in. Hemi with a fabricated six-barrel intake, five-speed manual transmission, and disc brakes.

1971 Plymouth GTX

1971 Dodge Charger R/T

1971 Dodge Charger restomod

In addition to the two never-was wing cars, Gary Beineke has put up for auction a pair of 1971 B-bodies reportedly based off of discarded styling concepts – a 1971 GTX with ‘Cuda-style hood and fender vents and a 1971 Charger R/T with a shorter variable-pitch rear wing and color-matched bumpers and hideaway headlamps – as well as a winged 1971 Dodge Charger restomod with a 6.1L Gen III Hemi V-8 and six-speed manual transmission.

All five will cross the block as part of Mecum’s Indianapolis auction, scheduled for May 12-20. For more information, visit Mecum.com.

If you find yourself blinded by the lights while driving at night, you aren’t alone. Complaints from drivers who are being blinded by oncoming traffic is becoming a regular topic of conversation, with some folks avoiding going out at night whenever possible to remedy the situation. Sometimes turning mirrors away from the glare isn’t enough. For driver’s piloting shorter vehicles, the passing of a large truck or SUV can easily light up the other car’s interior like an aquarium on display.

Today’s headlights are faster than the speed of dark. The LEDs in new vehicles can turn nighttime into daytime with the flick of a switch, but how safe is it, really? Regulations on headlights hasn’t changed in decades, while vehicle design and bulb technology has advanced. There are active online communities and petitions dedicated to discussing the causes and solutions to blinding headlights. A quick internet search for “ban blinding headlights” will reveal several pages of results.

According to John Bullough, the Light and Health Research Center’s Program Director at the Icahn School of Medicine, there are three primary issues that have added to bright beams causing temporary blindness on the roads, the most obvious being America’s love for big, tall vehicles. The rising placement of headlights on supersized pickup trucks and SUVs creates a more direct line of glare right into the eyes of those who opt for cars that sit lower to the ground.

The second cause of being blinded by the light is the changing of bulb technology and varying color hues. Vehicle manufacturers have long moved away from the standard halogen bulbs which produce a yellowish ray of light that is easier on the eyes. The move to LEDs introduced a brighter, harsher blue or white light that seemingly reaches farther to cut through the darkness, but commonly causes drivers to see spots after the vehicle passes even if eyes are averted to avoid the glare. The main issue is how the regulated lighting is measured: The human eye in sensitive to an LED’s blue hues vs. the warmer yellow halogen lights, but the light meters are not. Perhaps continuing the use of the old method of measurement isn’t too bright.

The third and most easily fixed issue for light blindness is headlight alignment. Bullough states that is it increasingly common for vehicles to have headlights out of alignment, even in new cars from the factory; “We actually did some measurements not too long ago and found that probably about two-thirds of every car had at least one headlight that was either aimed too high up, which is something that creates a lot of glare for other drivers, or too far down, which essentially limits their visibility.”

Matt Brumelow, Senior Research Engineer at the Insurance Institute for Highway Safety, supports this claim, explaining that federal regulations over headlights are certified based upon the independent vehicle. After installation, there is no further testing to ensure the headlights are aimed properly. Are you constantly flashed by the opposing traffic’s brights, even though your vehicle’s brights aren’t activated? Your lights could be out of alignment. Just to make sure, it’s a good idea to make any adjustments necessary to avoid blinding other drivers, and to ensure you’re getting the most out of your vehicle’s lighting.

The solution feels like it’s lightyears away

There is a potential solution in the works that involves implementing “adapting driving beams” into new vehicles. Adaptive driving beams automatically adjust the light output emitted from LED headlights to avoid blinding pedestrians and other drivers in passing. However, Brumelow warns that the availability of this new technology may not reach our roads anytime soon; “We’re still not aware of any that are available in the U.S., so it might take a few years for the manufacturers to make sure that their high beam or their adaptive driving beam technology meets the requirements that the NHTSA has released.”

Currently, no regulations or legislation is in place that would require automobile manufacturers to implement the adaptive driving beams into vehicles by a specific date. Even if this technology is adopted by the United States, it doesn’t resolve the fact that millions of vehicles are already on the road without this feature in place. In the meantime, the future will likely get even brighter. The best short-term solution for drivers with sensitive eyes could be to keep a pair of polarized night driving glasses in the glovebox, available for under $20 on Amazon.

Despite the wooden body, the luggage lashed to it wherever possible, and the hotel name stenciled on the doors, this 1931 Ford Model A boattail listed for sale on Hemmings.com has only spent its recent years doing promotional work for a hotel and likely wasn’t built to be some jauntier version of a depot hack. Or, at least, that’s what we’re presuming, given that the lack of luggage and passenger space would make this a less than ideal vehicle for fetching any more than one hotel guest from the nearest train station. That said, the provided description of the car makes no mention of its origins, other than to say that it came out of Ohio, or of the intended purpose behind the boattail body. From the photos, that wooden boattail body appears simplistic but well crafted, and it could very well have been installed in place of the car’s original body when the car was relatively new, judging from the wear marks and assorted minor damage to the body. And if that’s the case, the boattail must be of rather sturdy construction and must have been well maintained over the years.

According to the California-based seller, it’s a running and driving car that could use some assorted servicing beyond, apparently, the tuneup that was done not long before these pictures were taken. From the seller’s description:

It was brought out from Ohio many years ago to San Francisco, CA and still retains its license plate from 1931. It was purchased by a large collector who also owned the San Remo Hotel. The car was used as a promotion vehicle for many years by the hotel for its advertisements, special events and showings. The hotel is now sold and going through some changes for its future but its 100-year history will still live on.

1931 Ford Model A boattail for sale on Hemmings.com

1931 Ford Model A boattail for sale on Hemmings.com

1931 Ford Model A boattail for sale on Hemmings.com

1931 Ford Model A boattail for sale on Hemmings.com

1931 Ford Model A boattail for sale on Hemmings.com

If you follow the sport of mixed martial arts, then you no doubt know who Josh “The Warmaster” Barnett is. He won the UFC Heavyweight Championship in 2002, was the LPW Heavyweight World Catch Wrestling Champion in 2018, and aside from that, he also created his own series with Josh Barnett’s Bloodsport, where MMA meets pro-wrestling. What many folks don’t know however, is that professional athlete aside, Barnett is also a rabid automobile enthusiast who owns, wrenches and mentors his students not only in the athletic arena, but under the hood as well. On this episode of the Hemmings Hot Rod BBQ podcast, we sit down to talk muscle cars, automotive technology, and Bourbon, because yes, The Warmaster does that to.

It looked like a charmingly shrunken first-generation Corvair with jet-style air scoops on its flanks. The gleaming red ZAZ 968 was a fascinating curiosity, one whose clattery, air-cooled engine I could imagine hearing run in my head even as I encountered the car silently parked. This 1976 model was nearly 20 years the senior of its new owner, who’d recently acquired it, originally from the country of both its and his birth, Ukraine. The ZAZ 968 had joined a restored VAZ 2103 (Lada 1500), an original Moskvich 412, and a low-mile, late Volvo 240 wagon in the fleet of Roman Grudinin.

Roman Grudinin stands between a 1982 VAZ 2103-Lada 1500 and a 1976 ZAZ 968

Roman stands between his 1982 VAZ 2103 (Lada 1500) and 1976 ZAZ 968; both will star in future Hemmings feature stories.Photo by Mark J. McCourt

I spent quite some time conversing with Roman when we met last summer. This young enthusiast—professionally, a Business Coordination Project Manager at Volvo Car USA—impressed me with his deep knowledge about, and passion for, the Soviet cars that represented his family’s culture. I arranged to visit him at his New Jersey home a few months later to photograph the Lada that he’d personally restored, as well as the ZAZ, and both will star in forthcoming feature stories in Hemmings publications. The 27-year-old, who’s lived in the U.S. since before his second birthday, shared that his transportation interests were broader: along with hosting a Soviet-transportation-focused YouTube channel, he’s driven buses and trains, flown airplanes and helicopters, and has an internationally respected collection of historic LAZ bus memorabilia. Roman offered to discuss what fostered his fascination with mechanical things from that part of the world, all built in an era that ended before he was born.

​The Sound of Petrol Power

Roman Grudinin holds up the engine cover of a LAZ 695N bus

“My passion for the LAZ brand started when I was very young, close to three years old. I was in Odesa, Ukraine, with my grandparents at the time. While they had a car, they—like many people owning cars—preferred to use public transport in the city. Because of convenience, this was a much quicker and easier way to get around. A lot of people didn’t park their personal cars close to their house because there was no ability to do that: you would park it in a garage in an outlying area, then you’d have to get to and from that garage, so people didn’t drive their cars daily. Buses are a big part of life for people in Ukraine and other post-Soviet countries. We used buses and trolley buses a lot, and there was one type of bus that stuck out for me more than others. The reason was its sound and smell.

“The Soviet Union and Hungary once had an agreement for joint economic development. In Hungary, there was a large bus manufacturer called Ikarus. They made super-high-quality buses starting in the 1930s, and their 200-series bus became extremely popular. In all honesty, their quality was better than LAZ’s buses at the time, and there were quite a few of them around, but LAZ buses were still in more volume. When I was a kid, for one reason or another, the Ikarus bus didn’t really fascinate me because, A) it looked like a box on wheels and, B) it ran on diesel.

“The gasoline engine on LAZ buses had a specific sound because the engine is in the back and the exhaust is short in length. It sounds almost like a glasspack exhaust system on a Chevy big-block. It was very, very distinctive. As a kid, I was fascinated with the bubbling sound. I always wanted to ride on a LAZ bus, and if one didn’t come, I would ask my grandma to wait for the next. The three-year-old me didn’t understand what they were, why their sound was different… it was just interesting.

“By the time I was seven, I was aware that there were multiple different types of buses, and the ones I liked wore a circle with an upside-down V. I don’t know why, but I was too young to really question it. When as I got a little older, I started to ask, ‘What is that? Why is there an upside-down ‘V’? My grandma laughed and said, ‘That’s not an upside-down V, that’s a Cyrillic L. The L stands for Lviv, that’s a city in Ukraine. I wanted to know why it was on the buses. She said, ‘These buses are called LAZ [ЛАЗ]. They’re made in Lviv, and in Ukrainian, LAZ stands for L’vivs’ky Avtobusnyi Zavod, which translates literally as ‘Lviv Bus Factory.’ I asked where the city of Lviv is, and she told me it’s in Northwest Ukraine, 12 hours away.”

​Learning to Love the LAZ Buses

Roman Grudinin stands by a a LAZ 695N bus

Because your writer wasn’t familiar with this company and its products, Roman brought me up to speed. LAZ was founded after World War II, in April 1945, and its focus wasn’t initially buses: it manufactured industrial equipment like small trailers and cranes on truck chassis. The first LAZ bus was an advanced experimental unit built in 1956, with mass production beginning the following year. This vehicle contained many ideas new to the Soviet industry including a unit-body, many glass windows, and a rear-mounted engine. The success of the engineers led to them being split off from LAZ to form an all-Soviet bus institute: most Soviet buses and trolley buses, from that point on, would be developed or approved by this organization. Even experimental buses that weren’t mass-produced wore the LAZ logo, so LAZ became a brand every Soviet person knew and could relate to.

“Imagine finding someone who doesn’t know what a Chevy is? Just like every American knows Chevy, every person living in the USSR knew LAZ.”

He continues: “Over the course of some years, I spent time at local bus garages in Odesa. They had LAZ buses, and I was able to familiarize myself mechanically with them at a really high level as a kid. I knew multiple drivers in those garages with grandkids my age who had limited interest in buses, so they enjoyed talking to me, teaching me, and showing me the ropes a bit. The first vehicle I ever drove was a LAZ-695, and that bus was quite large for a first drive!

“When I was 11, I told my grandparents I would really love to go and visit the LAZ plant to see how the buses are made. In concept it seems crazy, but believe it or not, my grandmother and I just got on a train and went to Lviv.

​Close Encounters of the LAZ Kind

LAZ A183 bus drives out of the LAZ factory gates in Lviv, Ukraine

“It was a 12-hour train ride, overnight. We walked out of the train station, and I told the cab driver, ‘Take us to the bus factory.’ My grandmother said, ‘He doesn’t know what that is. You’ve got to tell him…” and the driver cut her off mid-sentence, saying, ‘Of course I know what that is, there’s only one bus factory!’ That was kind of funny, I remember it well. When we arrived, we learned the plant didn’t do tours, especially for kids; you had to be 18 or older to walk around the facility because it was considered dangerous. There were places you could trip and fall, or something could hit you—it was a big operation. I was sad, but I didn’t give up. I started talking to the security guards, telling them about my interests around the buses.

“As I was talking to the guards about my experiences at the garages, they realized I wasn’t just a passerby- we’d come all the way from Odesa, and that they really had to show this kid around. They were probably thinking they needed to get permission, so they asked for our information and my grandmother’s cellphone number. We exchanged contacts and left to walk around the city, and then we got a call. They said, ‘Can you come back to the plant?’

​Youthful Brand Ambassador

Roman Grudinin with a LAZ 5208 bus in the LAZ factory

“I was so excited. We went back and they gave us a tour, after hours. There were no people working, but there were a lot of buses that I saw in mid-production. Not only did I see how they were constructed, I saw a lot of new-model buses I’d never seen before, because the latest models were being made for the capital city, Kyiv, and they hadn’t yet reached Odesa. It was really cool: at that point, I’d connected the circle from a kid being interested in the sound – to someone who would hang around bus garages and would see how they were operated—to someone who, at a young age, was able to see the plant. So we left Lviv with a successful tour of the bus factory,” Roman says with a smile.

He paused in his recounting, offering this aside before resuming his story: “It’s important to note that while I was passionate about this brand, my interest was really all things mechanical.

“After we got back to Odesa, people at the bus plant contacted us via the phone number we’d given and said, ‘Management of the plant found out you were so interested, and got excited about this because they realized not a lot of kids are.’ They asked us to come back, and three days later we were on a train back to Lviv. When got there, I was essentially treated like royalty: they asked me to meet this person and talk to that person and walk around in this area, and then do the same in a different area. They were enthusiastic to show us a lot more than I’d seen on my brief, off-the-books tour three days before. I asked a lot of questions, and it was a much slower pace, so I got to see more.

“They realized, ‘This kid’s different in the sense that he really understands this stuff.’ And they asked my family if they’d leave me there for a week. They would give me a driver and car, and someone would take care of me for the week so that I could hang around with the children of the management of the plant; they wanted my excitement to rub off on those kids, who didn’t really have any interest. I did it—I stayed. And I was having too much fun to leave, so I asked if I could extend it. That turned into a two-week stay. The following year they said, ‘We would love to invest our energy in you. Come back and stay for as long as you want.’ I stayed for a month. And then as I got older, I did this a couple of times over a couple of summers; that turned into me interning and working there.”

The LAZ experiences proved a gateway, Roman reveals: “My visits to Ukraine saw me exploring seven different automotive factories, hopping from one train to another, and as a kid, sneaking into places just to see the vehicles there while pretending I’m supposed to be there.

“It became a part of all our lives. Let me put it this way: I began to work at the plant, and at the headquarters of the holding company, for some time both in-person during summers, and virtually when in the U.S. Amazingly enough, my interest led to my family investing time, money, and energy into the plant, and it became more than just an interest.”

Roman Grudinin in  a LAZ A183 bus in the LAZ factory in Lviv, Ukraine.

Roman Grudinin by a LAZ A183 bus in the LAZ factory in Lviv, Ukraine.

Roman Grudinin stands with a LAZ 695N bus

​Hobbyist Turns Historian

LAZ bus models on a bookshelf

The unusually throaty sound of a particular type of bus had ultimately made a dedicated historian of the bus’s manufacturer, as Roman absorbed model information from long-term LAZ employees during his plant visits. He sought articles of memorabilia commemorating decades of the company’s products, most of which were already long gone in history by the time he was born. He’d return home to the U.S. after summer stays in Lviv with newly acquired collectibles.

“I had a hobby that turned into a collection unknowingly, without a goal,” he muses. “People in the plant would say, ‘This book has been in our office for 30 years. We don’t really need it and you might find it interesting. Here, take it.’ It might be a model or a brochure from the 1960s or ’70s. I’d find other little artifacts around the plant.

“After I had accumulated a certain number of things, I started bucketing them in categories: I had scale models. I had books. I had brochures. And when you have two or three of something, you wonder what other ones are out there. When I would walk around the city with my friends, I’d sometimes stumble on a flea market and someone would be selling books. Because the flea market was close to a bus garage, there might be a book on LAZ buses, and I’d buy it. Around this time, Google was becoming popular; I started using it to look at what other people were posting and to see what else is out there. Obviously, my friends weren’t into this stuff so it was a pastime on the side—it didn’t take up more than an hour here and an hour there.”

Roman now displays a small portion of his collection in his tidy home office. While the historical buses and their manufacturer make up the majority of what’s being spotlighted, there are books, models, and other items celebrating Soviet-era mechanical transport in car, train, and plane forms to peruse.

Touring the Collection

Bookshelf with car history books and LAZ bus nameplates

Stepping into the office, you’ll encounter a multi-shelf display dedicated to LAZ buses through the years. Another shelf, topped by an impressive large airplane cutaway, contains a variety of books, manuals, and pamphlets, as well as model nameplates off various buses. A glass curio cabinet displays different types of vintage 1960s metal children’s toy buses (LAZ-badged, naturally), employee ID cards to show their design evolution over the years, and more. There’s a shadowbox containing a variety of Soviet-government-designed LAZ pins and postage stamps. The walls are decorated with framed brochures and advertisements, as well as historic photographs taken inside the LAZ plant that are the only ones of their kind in existence. There’s even a poster of the crane that was one of this company’s original products. Much like with Roman’s collection of scale models, as your gaze moves across the wall, you can follow that company’s factory output from its earliest to its last days. Speaking of the factory’s earliest days, he shows me a delicate photo album that he discovered in an abandoned building on the plant property, was subsequently gifted, and is most certainly unique: it contains illustrations, plans, and photographs documenting the plant’s original postwar construction and layout.

Roman holds a book containing original renderings of the LAZ bus plant in Lviv, Ukraine

1940s Illustration of the proposed LAZ factory

Framed LAZ memorabilia hanging on a wall

Black and white photos of the LAZ plant in Lviv, Ukraine

LAZ bus scale models and nameplate emblems on a bookshelf

Cutaway model of a Soviet Ilyushin IL-62 jet on top of a bookshelf

Books, manuals, and other memorabilia on a bookshelf

Toy LAZ buses

LAZ pins in a framed shadowbox

​The Homemade Models: Wheels and Wings

Two scale LAZ bus models on a bookshelf

Atop the first shelf are two large-scale buses, one of which Roman himself built primarily from wood at the age of 10: he also hand-made some of the smaller bus models on the three shelves below. “I was trying to get a full model lineup together to show the evolution—both production and experimental,” he explains. “I’d acquired some books around certain types, and I didn’t have them in scale-model form. You go online, you can’t find any. You search on forums. While people know of the experimental bus from photos, they don’t know of any scale models of it ever having been produced. There’s this specific bus that was that existed in the 1970s: I want it in my lineup, so I have to make it. On occasion when I had free time after school, I’d look at photos and blueprints and schematics and whatever I could get my hands on. I would start with a certain material and try to figure out how to make certain pieces; it wouldn’t work, and I would try again. Through trial and error, and by going to various craft stores, I was able to acquire materials that worked for this, and was able to make models that filled the gaps of the lineup. It’s not that I like making models—I really don’t—I just wanted to get those specific buses in the model lineup.”

With a hint of assertion, he adds, “I don’t like collecting things with no purpose, and I absolutely hate clutter. That is why I am meticulous about what I add to the collection. Since I fell into this hobby, I feel obligated to preserve the history.”

Equally impressive is Roman’s cutaway airplane model representing an important Soviet jet, the Ilyushin IL-62. This was a COVID-lockdown project: he hand-made this display using household materials while referencing some photos and rough dimensions he found online. It underlines his fascination with all types of mechanical things, particularly those originating from that era and part of the world.

​​Keeper of the Flame

Roman Grudinin kneels by his 1976 ZAZ 968, which displays a period license plate from the Ukrainian Republic of the USSR.

Thanks to his videos and online presence, Roman has an international network of followers and acquaintances who turn to him for information and expertise when researching or restoring Soviet cars and buses. He’s glad to share his passion with like-minded enthusiasts. And in the LAZ-history world, he’s the information source. His interests took him to places all over the world where he’s met people he befriended and continues to remain close to, years on.

“For me, it’s as much about hunting for the rare pieces related to the brand, as it is about the buses and mechanical things themselves. I was a kid who had an interest in big vehicles, which then grew into other mechanical-related things. But the buses were something I could relate to—they were tangible, I could see them on the streets and ride in them. I could go to the garages and hang out, as a kid. I couldn’t do that at an airport, I couldn’t do that at military base. It was the bus garage. The buses I saw as a kid led me down the path of learning about the history and they helped expand my horizons. I don’t have an interest in modern American buses that you see every day because they are too common. My interest was always in Soviet tech. You know what I mean? It’s much more than just LAZ buses and Soviet cars, it’s tech that you can’t see on the street in the U.S. I guess you can say that I like vintage mechanical stuff.”

“Given what I know, I almost take it as a duty to consolidate it in a tangible way so the history is preserved. And believe me, I’m not the only one. There are thousands of people who are interested in this brand. It’s just that I had unique access, like no others did, to materials and information and the actual facility where they were made—at the time, in the biggest bus factory in the world.”